TUGAS PERTEMUAN 5 ADM JARINGAN

CONFIGURING RAPID PVST+

1. Konfigurasi PC

PC 1

PC 2

PC 3

2. konfigurasi VLAN

Switch 1

Switch 2 VLAN

Switch 3 VLAN

3. Verifikasi VLAN 

4. Tentukan Trunk ke VLAN 99

lakukan di Switch1 :

S1(config)# interface range f0/1-4

S1(config-if-range)# switchport mode trunk

S1(config-if-range)# switchport trunk native vlan 99 

 

lakukan di Switch2 :

S2(config)# interface range f0/1-4

S2(config-if-range)# switchport mode trunk

S2(config-if-range)# switchport trunk native vlan 99 

 

lakukan di Switch3 :

S3(config)# interface range f0/1-4

S3(config-if-range)# switchport mode trunk

S3(config-if-range)# switchport trunk native vlan 99 

5. Konfigurasi alamat IP ke interface Switch

lakukan di Switch1 :

S1(config)# interface vlan99

S1(config-if)# ip address 172.17.99.11 255.255.255.0 

 

lakukan di Switch2 :

S2(config)# interface vlan99

S2(config-if)# ip address 172.17.99.12 255.255.255.0 

  

lakukan di Switch3 :

S3(config)# interface vlan99

S3(config-if)# ip address 172.17.99.13 255.255.255.0 

Configure Rapid Spanning Tree PVST+ Load Balancing

Langkah 1 : Konfigurasi STP Mode

S1(config)# spanning-tree mode rapid-pvst

S2(config)# spanning-tree mode rapid-pvst

S3(config)# spanning-tree mode rapid-pvst 

Langkah 2 : Konfigurasi Rapid Spanning Tree PVST+ load balancing.

konfigurasi S1 dan S3 ke Primary root dan S2 ke Secondary root.

S1(config)# spanning-tree vlan 1,10,30,50,70 root primary

S2(config)# spanning-tree vlan 1,10,20,30,40,50,60,70,80,99 root secondary

S3(config)# spanning-tree vlan 20,40,60,80,99 root primary

Configure PortFast and BPDU Guard

Langkah 1 : Konfigurasi PortFast di Switch2

S2(config)# interface range f0/6 , f0/11 , f0/18

S2(config-if-range)# spanning-tree portfast

Langkah 2 : Konfigurasi BPDU Guard di Switch2

S2(config)# interface range f0/6 , f0/11 , f0/18

S2(config-if-range)# spanning-tree bpduguard enable

Langkah 3 : Verifikasi konfigurasi :